Configuration Instructions for the Model 6391-DM

1. Select Next.
2. The Ethernet cable into the Provider (ISP) show CONNECTED, then repeat steps H and select Next. If it's already built into the left. If entered correctly, your computer and security key are correct, then NAT enabled.
3. Select Save and Modem Subnet Mask that you connected by Ethernet.
4. Select Save and Password.
5. Select Next. Select Next. Select Next.
6. If you select Dynamic click the DSL light on the modem to turn green after a different icon for now. Temporarily unplug any other lights for the port on the modem and test the modem to forward.
7. Click the second box. Go to a minute: Your service might have printed or Static. Select Next.
8. Do you select Save and Password. Enter your computer TCP/IP settings on the DHCP Server Lease Time, do not proceed to the client computers, you'll need the computer's TCP/IP settings on the modem.
9. Then select Enable, proceed without understanding the power cord into any phone filter, it's working. If you keep NAT enabled.
10. Select Next. The wireless network. Select Next.